The country you have chosen is available for delivery but on another store. Please change your store to deliver to the country you want.
Forward Sailing offers you a wide range of sails for catamarans and dinghies.
Our original and unique range of horn sails will give a second life to your catamaran or dinghy by offering a modern look. They ensure an increased performance (more surface in the top, better profile) perfectly controllable (power management thanks to the twist of the sail).
Mainsails, Jibs, Spinnakers or Reachers are all products that we can offer you to bring your catamarans up to date and give you more pleasure in sailing.
Our sails are developed and tuned in France and Switzerland on Lake Geneva by our racing and development teams.
The sails are modeled on 3D software in Switzerland by our engineers.
The slim bi-radial cut offers better profile control and good fabric orientation. The more you spread the cunningham, the more the top of the sail twists and fades upwind.
This is the reason for our bull logo in our sails, which expresses the power of the horn sail cut!
Our sails are equipped with Head Twist Control HTC
The HTCs allow to visualize the air flows at the exit of the horn, they come in complement of the penons on the sail.
Make sure that the HTCs are parallel at the exit of the leech and loosen the sheet a little if the HTCs disappear behind the sail.
Profiled composite battens with tensioner
Simple, efficient and micrometric system to adjust the batten tension. Technical composite battens.
Our engineers have designed a unique and specific batten tensioner with a ruler to control the tension in the battens.
Laminated fabric
Dacron challenge cloth 6oz
We use high quality fabrics composed of two Milar films treated against UV rays, sandwiched between polyester reinforcements and an anti-tear grid.
This results in an inextensible performance fabric for a good maintenance of the profile.
NX5 battened jib for Hobie Cat 16, designed to boost the catamaran’s behaviour.
Transparent NX5 laminate fabric, stainless steel luff wire and 3-point clew plate.
2 luff telltales and 2 leech telltales for better airflow control.
Ventilo 20 609 mainsail from the custom MXL range, made with NX6 laminate membrane by Challenge Cloth.
Square-top sail designed to perform in all conditions and make trimming easier.
Made after quote approval, with a 45-day delivery time after validation.
Jib for Hobie Cat 18 catamarans, designed to replace or upgrade a worn jib.
Tri-radial cut with a fine and stable profile, made from reinforced T-725 X-PLY monofilm fabric.
3 telltales, zipped luff and upper finish with Velcro locking system.
Training Optimist sail designed for clubs, sailing schools and young sailors.
High-visibility coloured design, reinforced monofilm window and built-in learning markers.
Reefable sail with battens and wind indicator flag included.
FWD Sailing mainsail compatible with New Cat F2, made from 205 g/m² Dacron in white and neon yellow.
Cross cut shape with moderate depth, reasonable square-top head, 4-layer reinforcements and 16 mm stainless eyelets.
Composite battens, strap tensioners with cleat, large batten boxes and 2 reefs with shock cord.
Pack of 5 training Optimist sails for clubs, sailing schools and teaching fleets.
Sails numbered from 1 to 5, made from 4 Oz / 180 g Dacron, with high-visibility design and transparent window.
Sleeve-type club sail, without battens, with learning markers, wind indicator included and quick reefing system.
Pack of 6 screw batten tensioners for easy batten tension adjustment.
Simple micrometric system with tension scale to quickly find and repeat your settings.
Ideal for upgrading a sail and replacing less practical lashing systems.
Jib cover for furling jibs left rigged on the boat.
5.55 m length, grey 900 denier polyester fabric and high-resistance plastic zip.
A simple protection against wind and UV, designed to save rigging time.
FWD Sailing mainsail compatible with Topaz 16, made from 205 g/m² Dacron for club, sailing school and leisure use.
Cross cut shape with moderate depth, reasonable square-top head, 4-layer reinforcements and 16 mm stainless eyelets.
Composite battens, strap tensioners with cleat, large batten boxes and telltales on panel and leech.
FWD Sailing mainsail compatible with Hobie Dragoon, made from 205 g/m² Dacron.
Cross cut shape with moderate depth, reasonable square-top head, 4-layer reinforcements and 16 mm stainless eyelets.
Profiled composite flat battens, strap tensioners with cleat and large batten boxes included.
FWD Sailing mainsail compatible with KL 13.5, made from 260 g/m² Dacron.
Cross cut shape with moderate depth, reasonable square-top head, 4-layer reinforcements and 16 mm stainless eyelets.
Composite battens, strap tensioners with cleat, large batten boxes and 1 reef with shock cord included.
FWD Sailing mainsail compatible with Hobie Twixxy, made from 205 g/m² Dacron, White and Blue colours.
Cross cut shape with moderate depth, reasonable square-top head, 1 reef point and telltales on panel and leech.
Profiled composite flat battens, strap tensioners with cleat and printed technical vocabulary included.
FWD Sailing mainsail compatible with Hobie Cat 15, made from 205 g/m² Dacron, White and Green colours.
Cross cut shape with moderate depth, reasonable square-top head, 1 reef point and telltales on panel and leech.
Profiled composite flat battens, strap tensioners with cleat and printed technical vocabulary included.
FWD Sailing mainsail compatible with Hobie Catsy, made from 205 g/m² Dacron.
Cross cut shape with moderate depth, reasonable square-top head, 4-layer reinforcements and 16 mm stainless eyelets.
Profiled composite flat battens, strap tensioners with cleat and large batten boxes included.
FWD Sailing mainsail compatible with New Cat 12, designed for club, sailing school and leisure use.
Cross cut shape with moderate depth, reasonable square-top head, 4-layer reinforcements and 16 mm stainless eyelets.
Profiled composite flat battens, strap tensioners with cleat and telltales on panel and leech.
FWD Sailing mainsail compatible with Hobie 16 Easy, made from 205 g/m² Dacron, White and Orange colours.
Cross cut shape with moderate depth, reasonable square-top head, 1 reef point and telltales on panel and leech.
Profiled composite flat battens, strap tensioners with cleat and printed technical vocabulary included.
FWD Sailing mainsail compatible with Hobie Advance, made from 205 g/m² Dacron.
Cross cut shape with moderate depth, reasonable square-top head, 4-layer reinforcements and 16 mm stainless eyelets.
Profiled composite flat battens, strap tensioners with cleat and large batten boxes included.
FWD Sailing mainsail compatible with Twincat 15 Sport, made from 205 g/m² Dacron for club, sailing school and sporty leisure use.
Cross cut shape with moderate depth, reasonable square-top head, 4-layer reinforcements and 16 mm stainless eyelets.
Composite battens, strap tensioners with cleat, large batten boxes and telltales on panel and leech.
FWD Sailing mainsail compatible with Topaz 12, made from 205 g/m² Dacron for club, sailing school and leisure use.
Cross cut shape with moderate depth, reasonable square-top head, 4-layer reinforcements and 16 mm stainless eyelets.
Composite battens, strap tensioners with cleat, large batten boxes and telltales on panel and leech.
FWD Sailing mainsail compatible with New Cat 12 XTD, made from 205 g/m² Dacron in white and red.
Cross cut shape with moderate depth, reasonable square-top head, 4.98 m luff and 1.50 m foot.
Composite battens, strap tensioners with cleat, large batten boxes, telltales and 2 reefs with shock cord.
FWD Sailing mainsail compatible with New Cat 12 Racing, designed for club, sailing school and sporty leisure use.
Cross cut shape with moderate depth, reasonable square-top head, 4-layer reinforcements and 16 mm stainless eyelets.
Composite battens, strap tensioners with cleat, large batten boxes, telltales on panel and leech.
FWD Sailing mainsail compatible with Twincat 15, made from 205 g/m² Dacron for club, sailing school and leisure use.
Cross cut shape with moderate depth, reasonable square-top head, 4-layer reinforcements and 16 mm stainless eyelets.
Composite battens, strap tensioners with cleat, large batten boxes and telltales on panel and leech.
FWD Sailing mainsail compatible with KL 10.5, made from 260 g/m² Dacron in white and green.
Cross cut shape with moderate depth, reasonable square-top head, 4-layer reinforcements and 16 mm stainless eyelets.
Composite battens, strap tensioners with cleat, large batten boxes and 1 reef with shock cord included.
3 m² land yacht mainsail in 205 g/m² Dacron, with cross cut shape and moderate depth.
Profiled composite flat battens, strap tensioners with cleat and large batten boxes included.
4-layer reinforcements, 16 mm stainless eyelets, 8 to 10 mm bolt rope and telltales on panel and leech.
4.5 m² land yacht mainsail in 205 g/m² Dacron, with cross cut shape and moderate depth.
Profiled composite flat battens, strap tensioners with cleat and large batten boxes included.
4-layer reinforcements, 16 mm stainless eyelets, 8 to 10 mm bolt rope and telltales on panel and leech.
5.3 m² land yacht mainsail in 205 g/m² Dacron, with cross cut shape and moderate depth.
Profiled composite flat battens, strap tensioners with cleat and large batten boxes included.
4-layer reinforcements, 16 mm stainless eyelets, 8 to 10 mm bolt rope and telltales on panel and leech.
