BERS TRAX PAD: better protection for your catamaran hulls

BERS TRAX PAD: better protection for your catamaran hulls

A catamaran spends a lot of time out of the water.
At the club, on a trailer, on the beach or during preparation, the hulls are often placed, moved, tilted or handled on surfaces that can leave marks.

BERS TRAX PAD are designed to protect your catamaran hulls during these key moments.
They provide a softer, more stable and more suitable contact surface than the ground, a hard block or an improvised support.

Swiss offer: 20% already applied

On the Swiss store, get 20% off the BERS TRAX PAD.

No promo code is needed.
The discount is already active directly on the product.

What are BERS TRAX PAD used for?

BERS TRAX PAD are hull protection pads for catamarans.
They are sold as one pair, meaning two pieces.

They allow the hulls to rest on protective foam instead of being in direct contact with a hard or abrasive surface.

This helps reduce friction, light impacts and pressure points when the boat is ashore.

A shape designed to protect the sides of the hull

The shape of the BERS TRAX PAD matters.
The product uses 3 different foam lengths to better follow the 3 sides of the hull.

This design protects the underside, but also the sides of the hull.
The outside area is more covered, which is useful when the catamaran needs to be tilted on its side on land.

This detail is especially relevant during handling at the club, on the beach or in the boat park.
The boat can be tilted more cleanly, with less direct contact between the hull and the ground.

Useful when tilting or capsizing the boat on land

BERS TRAX PAD can also help during handling linked to capsizing or tilting the boat.

By placing the second support near the front beam, it becomes easier to roll the catamaran while reducing aggressive pressure points on the hull.

It is not only a storage accessory.
It is also a practical handling aid for taking better care of a sport catamaran.

Which catamarans are they for?

1. Hobie Cat 14 and Hobie Cat 16.
2. Dart 15 and Dart 18.
3. Class A.
4. SL 15.5 and SL 16.
5. Older generation Ventilo 18 and Ventilo 20.
6. F16: Viper, Falcon, Nacra, Bimare X16.
7. F18: Tiger, Alado, Diam, Hawk, Wild Cat, Nacra F18, Infusion, Cirrus R, B1, Schockwave, AHPC C2, Capricorn.
8. Tornado, Nacra 20 and Flying Phantom.
9. Older sport catamarans such as Hobie Cat 17, Hobie 18, Formula, Hobie 20 and Hobie Cat 21.

Why use them regularly?

1. To protect hulls during storage.
2. To avoid direct contact with hard surfaces.
3. To reduce marks when preparing the boat.
4. To handle the catamaran more safely when it needs to be tilted.
5. To help extend the life of your equipment.

Simple, lightweight and easy to install

BERS TRAX PAD are made from high density EVA foam.
This foam absorbs shocks and helps distribute pressure points.

Installation is simple thanks to an elastic strap.
They are lightweight, easy to set up and suitable for regular use at the club or while travelling.

Enjoy the Swiss offer

BERS TRAX PAD currently have 20% off on the Swiss store.

No promo code is required.
The discount is already applied on the product page.

Offer valid while stocks last.